Re: [LCtalk] DMX in / RGBW Fixture --> Saving the show

[Bernd Mahler Heliosmultimedia]

Fokko van Duin schrieb:
> At 15:29 +0200 14-04-2008, P. Koelman wrote:
> > I think the best is to use the layer to which you have set the 
> > console. (NOT the same layer as you use for midi) So if you use layer 
> > A for midi, use layer B for the console.
> > Make layer B "LTP" (Lowest Takes Precedence) so that the lowest 
> > values will be used by the mixer in the Lanbox.
> >
> > Now, when you have the faders on the console all at 100%, the mixer 
> > in the Lanbox will use the values of layer A (Isadora), because they 
> > are lower.
> > When you set the faders on the console to 0%, you will have a 
> > blackout because the mixer takes the lowest value.
>
> This will only work if you place layer B -above- layer A. Mixing 
> actions work on current -and- lower layers, but not on higher layers.
>
> > > Red Green Blue AND White (4 Channel Fixture). Where is it in the 
> > > library? I could not find it.
> >
> > Sorry, I can not help you with that.
>
> You can very easily create the fixture by using a duplicate of the 
> generic RGB fixture, and add a White wheel. See the library chapter of 
> the tutorial.

Thank you so far.
I will not be able to test your suggestions until tomorrow noon.
Another question is: how can I save and restore the show?

Let's say I have a backup lanbox and I need to have the show installed 
there.  Or I Want to save the showfile on a usb device and restore it 
from there.

Thank you.

--
Bernd Mahler
HeliosMultimedia