Re: [LCtalk] DMX in / RGBW Fixture

[Fokko van Duin]

At 15:29 +0200 14-04-2008, P. Koelman wrote:
> I think the best is to use the layer to which you have set the console. 
> (NOT the same layer as you use for midi) So if you use layer A for 
> midi, use layer B for the console.
> Make layer B "LTP" (Lowest Takes Precedence) so that the lowest values 
> will be used by the mixer in the Lanbox.
>
> Now, when you have the faders on the console all at 100%, the mixer in 
> the Lanbox will use the values of layer A (Isadora), because they are 
> lower.
> When you set the faders on the console to 0%, you will have a blackout 
> because the mixer takes the lowest value.

This will only work if you place layer B -above- layer A. Mixing 
actions work on current -and- lower layers, but not on higher layers.


> > Red Green Blue AND White (4 Channel Fixture). Where is it in the 
> > library? I could not find it.
>
> Sorry, I can not help you with that.

You can very easily create the fixture by using a duplicate of the 
generic RGB fixture, and add a White wheel. See the library chapter 
of the tutorial.

--
Fokko van Duin,
CDS advanced technology bv,
http://www.lanbox.com/