Re: [LCtalk] Gain / Curves / slopes not visible in on-screen stage

[Fokko van Duin]

At 07:31 +0200 13-08-2007, P. Koelman wrote:
> > If you double click on a stage icon, you should see the 
> > gain/curve/slope settings. If not, then you are not connected with the 
> > box, or have a lighting channel not mapped with a box/DMX address.
>
> Sorry, I mean that I do not see the result of the gain/curve/slope 
> settings in the on-screen stage!
> If I have a lightchannel with curve 1 (inverse) the output is indeed 
> inversed, but onscreen it is not.

Yes, that is correct. The indicators on the stage are always showing 
the mixer values, and there is no option to choose e.g. DMX out. You 
need to open the DMX monitor to see the DMX out values.

Normally you do not want to see the result after post-processing, as 
e.g. with inverting pan/tilt you are correcting physical properties 
of a fixture, so it matches your light channel values.

--
Fokko van Duin,
CDS advanced technology bv,
http://www.lanbox.com/