[LCtalk] any cue

[Dave]

hi :)

ok so im at the end of the first track and everything is looking very 
nice much smoother this way than with midi notes i have a lot more 
control :)

i am looking to be able to recall any cue at any time as our set 
consists of lets say 30 tracks and each track as its own lights and 
depending on the gig they could be in any order so i need the lights to 
be able to respond that way also

track one i used cue sheet 1 via layer D for my command cue and directed 
2 3 and 4 via layers A B and C to it out of channel 1 to my sequencer 
there it is controlled by Bank 0 and Program Change 2  and midi channel 
1 this seems to work fine for this track but im not sure if it will over 
many tracks  i can see engine pause and engine resume commands from lc+ 
cmd chart and have one at each end of the track

also on the end of each cue list i have the command to go to the next 
line of cue sheet 1 for the next command this is where i have gotten 
myself stuck as im not sure hmm let me rephrase that lol havent got a 
clue is more like it how to make the box see what track im on in SX 
because i cant see where to recall my different cues from, on the end of 
cue 2 i put a command to go to cue 1 for its command which is at this 
moment holding it on line 4 with a hold forever command line 5 is the 
next cue and that is cue 4 but if i dont put a hold forever on 4 when i 
hit the first cue inside SX it goes straight to line 5 and plays cue 4 
doesnt even look at the ones before it but with hold forever it wont go 
any further than line 4

i think what i was thinking was that with program changes and pause and 
resume cmds that i would be able to jump from track to track and the cue 
sheet relevant to the track would be triggered by my program change

as always any help is greatly appreciated

all the best
Dave