RE: [LCtalk] DMX vs. MIDI

[Fokko van Duin]

At 12:36 -0400 09-10-2006, Carl Byrne wrote:
> Hello Fokko,
>
> Thank you for the response. I will try some more experiments based on 
> your suggestions. However, when I last worked on this problem, I tried 
> setting DMX to layer B. I had layer B at the top of the stack. I also 
> created a cue list running in layer B with a hold forever line, with no 
> outputs on any of the channels.

It sounds as you did not activate the used channels in layer B. 
Create a cue which sets the used channels to 0, and run it in layer A 
and layer B. Leave it running forever, so those channels are always 
activated at startup (do save LanBox data).


Set DMX-input to layer B in the Global settings of LCedit+.

--
Fokko van Duin,
CDS advanced technology bv,
http://www.lanbox.com/