Re: [LCtalk] DMX vs. MIDI

[Fokko van Duin]

At 08:31 -0400 09-10-2006, Carl Byrne wrote:
> I am having difficulty getting my DMX input to work along with my MIDI 
> input. I have a MIDI device controlling channels 1-49 (a Peavey 
> PC-1600.) If I map my DMX mixer to layer A(Channels 1-24), it will work 
> but will over ride the MIDI control of same output channels.

If you want to control the same channels from two (or more) layers, 
you must set the top layer e.g. in HTP mode. So if you use e.g. A for 
MIDI and B for the DMX input, set layer A to HTP mode.

BTW be sure that layers A and B channels are normally 0 by using a 
cue (hold forever), with 0 for the used channels.

--
Fokko van Duin,
CDS advanced technology bv,
http://www.lanbox.com/