Re: [LCtalk] Firmware v2.06 beta release, please test.

[Matthijs van Duin]

On Mon, Mar 06, 2006 at 11:44:20AM +0100, Fokko van Duin wrote:
> 2. Press the Power (or Menu) key 3 times short, one long, 3 times 
> short, one long; you should see IR1 on the display. If not try from 
> step 1 again. Note: Short is about a quarter second pressed, long a 
> full second pressed.

Three notes:

1. short is actually just as short as possible -- there's no way to 
press it too short to be recognized (as long as the remote still sends 
out a signal at all).

2. if you have trouble getting the lanbox to recognize the sequence, try 
spacing the keypresses a bit more apart.  So, <short> <wait> <short> 
<wait> <short> <wait> <loooooong> <wait>, repeat once.

3. if the lanbox fails to recognize the sequence on the first try, press 
a random *different* key first, and then retry the sequence with the 
power/menu key again.

--
Matthijs van Duin  --  May the Forth be with you!