[LCtalk] Syntax of LCE telnet commands?

[Yetimon]

Hi there.  I've been playing around with an LCE, for the purpose of 
controlling LED lighting via a Crestron home automation system.  
Crestron will happily talk to the LCE over TCP/IP on port 777, I can 
login and execute some commands, but many of my commands are failing 
with a "?" response from the LCE, rather than a ">".   I can telnet 
into the box and get the same results, so it's not a Crestron problem.

I'm really flying blind with the syntax of the commands.  I've copied 
a variety of commands from LCedit's StreamWatcher window, some of 
which work, and some which don't.

For example, I can send *565B000101# and the cuelist will run quite 
happily.  I can run other cuelists such as *565B000201# without any 
difficulties.

However, if I try and manually change a colour on the fly, using a 
command like *C95B0001A5# I get a ? response and the lights do not 
change.

Just to make things really confusing, a command such as 
*C95B0001FF0004FF0007FF000AFF# will change the lights on channels 4 
and A, but not 1 and 7!  The LCE kindly gives me a > response, even 
tho it only executed half of the command!

Now, all of these commands are cut from the StreamWatcher window, and 
when I paste them into the Send Raw Command window they all work fine.  
It's just telnet that doens't work. :(

So, I guess my two main question are, is there any documentation 
around on the syntax of these commands, and is there a bug in the 
firmware which breaks telent'ed commands but works fine with LCedit?

I'm running firmware 2.03 and LCedit+ 3.2.1

Cheers!
-y