Home | News | Products | Support | Download | Sales | library | Guests | Contact | WebCam | Links
CDS Logo LanBox-Talk mail archive
 
By date: Prev | Next | Index By thread: Prev | Next | Index
Subject: Re: [LCtalk] DMX monitor
From: Fokko van Duin
Date: Mon, 08 Nov 2004 11:27:20 +0100

At 07:35 +0100 08-11-2004, Jean-Pierre Potvliege wrote:
I'm using the LCedit + 3.2.1X and i want to report a strange behavior of the DMX monitor : he don't display the level when I'm check the DMX out.
I see the layers, the mixer but not the DMX out !
The gains and the slope also seems not working !

You probably ruined some (all?) post-processing settings, here is how to restore to default (besides the erase LanBox menu command):

1. Open the patch editor, select all rows (menu select all).
2. Click on the I button, and type 1 into the "Set to" field, hit return. This sets all light channel to DMX channel patches 1:1
3. Select with the popup "Gains", de-select the I button (auto Increment), and enter 128 so all gains are back to 128 (100%).
3. Select with the popup "curves", and set them all to 0 (no curve).
4. Select "Slopes" and set them to 255 (highest speed).

Now your monitor will show the same values for DMX out as mixer.

Fokko van Duin,                     Creators of the LanBox-LC
CDS advanced technology bv,         DMX lighting controller.
http://www.cds.nl/                  http://www.lanbox.com/

Member of MIDI Manufacturers Association, MMA
By date: Prev | Next | Index By thread: Prev | Next | Index