| Home | News | Products | Support | Download | Sales | library | Guests | Contact | WebCam | Links | |
 |
LanBox-Talk mail archive |
| By date: Prev | Next | Index | By thread: Prev | Next | Index | ||||||
Hello Fokko and Matthijs! I'm experimenting with capture right now and it certainly looks promising. Although i also have problems with crashes of the demo version of capture (like john conry). I'm using Win2000 and a graphics card (G-force4 mx440) that does not support open GL. I'm trying to receive UDP packets from a lanbox-lcx (firmware v2.0) from the network but capture indicates that there are no providers present. The lanbox has IP-adress 130.89.117.xxx / network mask 255.255.240.0, while my PC has 130.89.164.xxx and mask 255.255.224.0. I guess you have to be on the same subnet to make this work? Is it possible to just change the mask and gateway of the lanbox in global settings? I'm not an network expert so i have no idea if that will work..... In the manual you indicate that turning UDP broadcast on generates up to 1 mbit/s of network traffic for 3072 transmitted channels. I presume that the load increases linear with the amount of channels you want to transmit? If that is true, is it possible to define a well restricted list of channels that has to be transmitted? For example: 1-24 + 100-120 or does it always has to be one range like 1-120? Last question; I know you guys are very busy but is it possible to publish a short reference or some other form of documentation for connecting to capture on your site? I find it not very user friendly that you have to search out al different kinds of manuals and e-mails before you find out that the answer to the question you have is either not in them or you missed it :-). Oke thanks a lot for answering! Keep up the good work! Mathieu
| |||||||
| By date: Prev | Next | Index | By thread: Prev | Next | Index | ||||||