Home | News | Products | Support | Download | Sales | library | Guests | Contact | WebCam | Links
CDS Logo LanBox-Talk mail archive
 
By date: Prev | Next | Index By thread: Prev | Next | Index
Subject: Re: [LCtalk] basic setup question
From: Fokko van Duin
Date: Wed, 28 Apr 2004 21:22:22 +0200

At 21:03 +0200 28-04-2004, Zombie Nation wrote: 
Let's say:
Midi channel 1 or any - note 99  - strobe 1  (velocity = flash intensity)
Midi channel 1 or any - note 100 - strobe 2 (velocity = flash intensity)

Interleave a note, as your device uses 2 DMX channels. Just put strobe 1 on DMX channel 99 and 2 on 101. Keep in mind that a release of the Note, also sets the DMX value back to zero, so on a keyboard press and hold the key! (use sustain to hold the tone, uh light ;-)

Better is to go to LCedit+ Global settings menu. In de MIDI tab remove (clear) all A fields except for MIDI channel 1. You can also change offset of MIDI channel 1 to e.g. -60, so that NoteOn pitch 61 sets DMX channel 1. After this the box listens only on MIDI channel 1.


--
Fokko van Duin,                     Creators of the LanBox-LC
CDS advanced technology bv,         DMX lighting controller.
http://www.cds.nl/                  http://www.lanbox.com/

We are member of MIDI Manufacturers Association, MMA
By date: Prev | Next | Index By thread: Prev | Next | Index