Re: [LCtalk] Use of spacebar

Home \| News \| Products \| Support \| Download \| Sales \| library \| Guests \| Contact \| WebCam \| Links
	LanBox-Talk mail archive

By date: Prev | Next | Index By thread: Prev | Next | Index

Subject:	Re: [LCtalk] Use of spacebar
From:	John Conry
Date:	Fri, 09 Apr 2004 08:50:21 +0200

On 8 Apr 2004, at 8:58 pm, Fokko van Duin wrote:

John,

Did you see any errors in the interface message field?

If you do a "Reconnect Interfaces" (menu command), is it working then?

As I have never seen this problem, other then with severe network problems, does clicking on buttons (Go Next / prev) work?

It looks like it might be a startup sequence problem. On night when both systems had the problem, I connected everything up - including the ethernet cables. I then powered everything on with one switch and booted the two computers. When I ran LCedit I had the space bar problem.

My normal startup mode is to power up everything and boot the computers but to leave the ethernet cables disconnected until boot up and logon is complete. I then connect the ethernet cables and start LCedit. Another, probably unrelated point, is that both computers have an Airport card (switched off).

If I get a chance tonight I'll play around with the startup sequence and see if I can get a reproducible error.

Regards,
John

--
John Conry

'I will stand up for you no matter what you're going through -- I'm still on your side. Any time day or night, don't care if it's wrong or right -- I'm still on your side.' BBMak

E-mail: john@conry.net
Web: http://www.conry.net

[LCtalk] Use of spacebar, John Conry
- Re: [LCtalk] Use of spacebar, Fokko van Duin
  - (- current message -), John Conry
  - [LCtalk] More on space bar not moving cues, John Conry
    - Re: [LCtalk] More on space bar not moving cues, Matthijs van Duin

By date: Prev | Next | Index By thread: Prev | Next | Index