Re: [LCtalk] Midi on the LCX

Home \| News \| Products \| Support \| Download \| Sales \| library \| Guests \| Contact \| WebCam \| Links
	LanBox-Talk mail archive

By date: Prev | Next | Index By thread: Prev | Next | Index

Subject:	Re: [LCtalk] Midi on the LCX
From:	Fokko van Duin
Date:	Thu, 18 Mar 2004 01:07:50 +0100

At 00:32 +0100 18-03-2004, Fairplay wrote:

I did like you said, but things are worse than I expected. Here's what happens:

I start the midifile with

1 1 1 1   Control 1  21  0   ctrl 21
1 1 1 1   Control 1  53  65 (#21 LSB)
1 1 1 1   Control 1  86  11  ctrl 86

1 1 1 5   Control 3  21  0   ctrl 21
1 1 1 5   Control 3  53  1 (#21 LSB)
1 1 1 5   Control 3  86  35  ctrl 86

Engine B ( midich. 1 ) will go to 65.11, Engine C ( midich. 3) will go
to 1.35, all just like expected.
But then cames the difference: so far, sending

4 1 1 1 Control 1 86 12 ctrl 86

Again: All three controller MUST be sent together, otherwise the result is unpredictable!

As I said before, the LanBox Go xxx.xx is split into three controllers as MIDI has no other way. If you don't want to use three controllers, use 1 MSC (MIDI Show Control) string or use bank select + program change.

Can you please contact me off this list for further support, as we use the list for private support email, which is not the purpose of this list.

Thanks,

--
Fokko van Duin,                     Creators of the LanBox-LC
CDS advanced technology bv,         DMX lighting controller.
http://www.cds.nl/                  http://www.lanbox.com/

We are member of MIDI Manufacturers Association, MMA

[LCtalk] Midi on the LCX, Fairplay
- (- current message -), Fokko van Duin

By date: Prev | Next | Index By thread: Prev | Next | Index