Home | News | Products | Support | Download | Sales | library | Guests | Contact | WebCam | Links
CDS Logo LanBox-Talk mail archive
 
By date: Prev | Next | Index By thread: Prev | Next | Index
Subject: Re: [LCtalk] martin roboscan
From: Fokko van Duin
Date: Mon, 27 Oct 2003 17:56:30 +0100

At 15:20 +0100 27-10-2003, Hans Kunz wrote:
i'm working with LCM, so do i also have to swapp pin 2&3 for the 1220xr?

Yes LCX & LCM is the same pinning, unless the 1220 is modified you need to swap, check with the supplier.


do you know where i get the latest firmware (there is nothing on martin.dk) ? and how did i make an update? the firmware is burned in an EPROM, isn't it? so i have to take it out erase it (UV light), .....etc.

Ask your Martin dealer for "upgrade".


i also will try it with the m4 model, but i thought that i would be easier with mode1.

Mode 1 & 2 is always tracking, and that can be terrible! Best is mode 4, as you can try tracking or vector mode. With our boxes the 16 bit vector mode (with or without a bit p/t speed setting) gives normally the smoothest movements ;-)

Have fun,

Fokko van Duin,                     Creators of the LanBox-LC
CDS advanced technology bv,         DMX lighting controller.
http://www.cds.nl/                  http://www.lanbox.com/

Member of MIDI Manufacturers Association, MMA
By date: Prev | Next | Index By thread: Prev | Next | Index