| Home | News | Products | Support | Download | Sales | library | Guests | Contact | WebCam | Links | |
 |
LanBox-Talk mail archive |
| By date: Prev | Next | Index | By thread: Prev | Next | Index | ||||||
Hans, i open the patch window ch=1 and DMX=1, for the second channel i used also a single dimmer ( ch=2 and DMX=2) ... etc. No, you shouldn't be changing the patch! When you create the fixture, you just make sure the base channel is set correctly. I'm guessing that you've patched the channels strangely. You'll probably want to do an "Erase LanBox" just to get back to the normal state again. If you just create one fixture and set it's base channels properly, you can then just highlight it and duplicate it... It will automatically assign the channels in order as you create them. But, you can also just download the 1220xr(m1) fixture definition I made and it will probably make your life a lot easier. But you need to make sure your patch is back to "normal". Jon -- Jon Daggett http://daggett.tv Castle Studios Productions http://castlestudios.com MidiLite Systems http://midilite.com
| |||||||
| By date: Prev | Next | Index | By thread: Prev | Next | Index | ||||||