Re: [LCtalk] midi (pc1600) to dmx

Home \| News \| Products \| Support \| Download \| Sales \| library \| Guests \| Contact \| WebCam \| Links
	LanBox-Talk mail archive

By date: Prev | Next | Index By thread: Prev | Next | Index

Subject:	Re: [LCtalk] midi (pc1600) to dmx
From:	Fokko van Duin
Date:	Sun, 19 Oct 2003 20:40:37 +0200

At 23:28 +0200 18/10/2003, Eric van Duin wrote:

Some more info about the pc1600

It is also nice to use a fader to start a number of cue's. Depending on the way you need to use your pc1600... I use it for strobe effects (and other parts of the show), which is quite nice. If the fader is "0%", there is no strobe, "10%" is a little amount of strobe and so on.
Use a string in a fader,
program:
F0 00 20 40 01 50 00 2A 35 36 30 31 30 30 30 pr 23 F7

Wow, a SysEx string ;-)

But it the same trick can be done also with just bank select & program change:
B0 00 00 C0 pr

In this case the fader may be used from 0 (Go 0) to 127 (Go 127), but by choosing another bank (B0 00 xx), you can recall any cuelist.

The MIDI specifications can be found at the MIDI org:
http://www.midi.org/about-midi/specshome.shtml

More practical info about MIDI are found e.g. at:
http://www.borg.com/~jglatt/tech/midispec.htm

--
Fokko van Duin,                     Creators of the LanBox-LC
CDS advanced technology bv,         DMX lighting controller.
http://www.cds.nl/                  http://www.lanbox.com/

We are member of MIDI Manufacturers Association, MMA

Re: [LCtalk] midi (pc1600) to dmx, (continued)

By date: Prev | Next | Index By thread: Prev | Next | Index