Home | News | Products | Support | Download | Sales | library | Guests | Contact | WebCam | Links
CDS Logo LanBox-Talk mail archive
 
By date: Prev | Next | Index By thread: Prev | Next | Index
Subject: Re: airport hook up (TCP/IP setup)
From: Fokko van Duin
Date: Mon, 14 Oct 2002 20:09:30 +0200

At 22:25 -0400 12-10-2002, johnvelezmac@mac.com wrote:
Thanks For the fast responce,
I'm not using a hub. Just a base station. I am using the Black crossover cable I have typed in an IP address of 192.168.1.77
When and where (in what program) did you type the address of 192.168.1.77?


I did get a Password field come up and put in the password 777. When I get to the Interface field I use the TCP/IP tab. No Luck.
Sorry, I don't understand what you mean. Can you give me the messages in the message box (click on More.. on the control panel to see the message box).

Notes:
TCP/IP can only work if your computer, wireless access point (base station) and the LanBox-LCX are in the same IP net. This means with 192.168.1.77 and a mask of 255.255.255.0 that the usable range of addresses are 192.168.1.1 through 192.168.1.254.

If you also have an internet connection you need either to switch your computer's setup or have a multi IP setup with router software. This requires however knowledge of TCP/IP networking.

Before using LCedit+ with TCP/IP you should test whether you can "ping" the LCX. A ping program is nowadays on every platform available.

Fokko
By date: Prev | Next | Index By thread: Prev | Next | Index